MOSQUITO FORCEPS |
Delicate mosquito forceps with self retaining ratchet.
Accurately machined interlocking serrations with bevelled edge.
Code: HAFMM.125
Length: 12.5 cm |
 |
 |
|
MATHIEU LIGATURE PLIERS - Standard |
Mathieu style needle and ligature holder. Serrated jaws for grip
Code: HPLM140
Length: 14 cm |
 |
|
|
MATHIEU LIGATURE PLIERS - T. C. |
Some as HPLM140 except with fine pitch matching.
Tungsten Carbide jaw surface.
Code: HPLMTC140TC
Length: 14 cm |
 |
|
|
SMALL TIP MATHIEU |
Mathieu style needle and ligature holder. Small delicate raised pad jaws with serrations for grip.
Code: HSTP125
Length: 12.5 cm |
 |
|
|
SMAHA PLIERS - STRAIGHT |
Versatile ligature forceps with slender 22mm jaw with
interlocking serrations.
Code: HPLSS140
Length: 14 cm |
 |
|
|
SERRATED SCISSORS |
Angled serrated sturdy cutting blades with wire holding
recess for non slip cutting, Suitable for wire, tape, bonds
and ligatures
Code: HSS120
Length: 12 cm |
 |
|
|
DIRECT BOND BRACKET HOLDER |
Reverse action spring loaded arms boll brackets until
released Serrations for superior grip with blade tip
allowing bracket positioning.
Code: HBHDB125.125
Length: 12.5 cm |
 |
|
|
MERSHON MOLAR BAND SEATER |
Precision lip with longitudinal serrations around the outer
edge with grid pattern serrations on the top surface.
Code: HBSmm.140 140
Length: 14 cm |
 |
|
|
DIRECT BOND REMOVER |
Tips wedge between the edges of the bracket base and tooth surface to remove direct bond brackets safely and comfortably.
Code: HPDR135.140 140
Length: 13.5 cm |
 |
|
|
DIRECT BOND REMOVER ANGLED |
Same as HPDBR135 except with 60 angle to allow easier access to difficult posterior brackets.
Code: HPDBRA135
Length: 13.5 cm |
 |
|
|
DIRECT BOND REMOVER - T.C. |
Removes brackets easily by gripping the face of the bracket in a horizontal position and pplying slight pressure by torquing or turning. Tungsten Carbide jaws for durability.
Code: HPDBRTC135
Length: 12.5 cm |
 |
|
|
POSTERIOR BAND REMOVER LONG |
Bond remover with 5mm plastic pad that on the occlusal surface of the molor with the removing tip accurately positioned to catch tile gingival edge of tile band
Code: HPPBRL140
Length: 14 cm
Replacement Tip: 5mm
Code: HPPBRSTS |
 |
|
|
POSTERIOR BAND REMOVER SHORT |
Some as HPPBRL140 except with short removing tip.
Code: HPPBR140
Length: 14 cm
|
 |
|
|
DISTAL END CUTTER - T.C. |
Cuts wires (lose to the buccal tube and solely holds the
distal end Tungsten Carbide cutting edges for precise
cutting petformance and durability.
Code: HCDET130
Length: 13 cm
Capacity: 0.55x0. 64mm
|
|
|
|
LONG HANDLE DISTAL END CUTTER - T.C. |
Similar to HCDETC130 but with long handles and
angled cutting edge, Tungsten Carbide cutting edges for
precise cutting performance and durability.
Code: HCDELHTC150
Length: 153 cm
Capacity: 0.55x0. 64mm |
 |
|
|
FLUSH CUT DISTAL END CUTTER - TC. |
Allows the archwire to be flush cut with the end of the
buccal tube reducing the possibility of discomfort or injury
due to archwire protrusion. Tungsten Carbide cutting
edges for precise cutting performance and durability.
Code: HCDEFCTC130
Length: 13 cm
Capacity: 0.55x0. 64mm |
 |
|
|
HARD WIRE CUTTER - T.C. |
Easily cuts archwires ligatures and pins. Tungsten
Carbide cutting edge maintains sharpness and
alignment and ensures durability.
Code: HCHWTC130
Length: 13 cm
Capacity: 0.55x0. 64mm |
 |
|
|
HARE WIRE CUTTER 15° ANGLE - T.C. |
Same as HCHWTC130 but with a 15° angle to allow
easier intra oral access to the posterior area.
Code: HCHWATC130
Length: 13 cm
Capacity: 0.55x0. 64mm |
 |
|
|
LARGE HARD WIRE CUTTER - T C. |
Cuts all types of woe cleanly and easily . Tungsten
Carbide cutting edge maintains sharpness and
alignment and ensures durability.
Code: HCHWLTC
Length: 15 cm
Capacity: 10mm Hard |
 |
|
|
STANDARD LIGATURE CUTTER |
Small head and cutting edge with bowed jaws for easy
access to difficult areas where a small cutting tolerance
is required. For cutting wire pins and elastics.
Code: HCSL130
Length: 13 cm
Capacity: 0.30mm Soft |
 |
|
|
STANDARD LIGATURE CUTTER - TC. |
Small head anti cutting edge with bowed jaws for easy
access to difficult areas where a small cutting tolerance
is required. For cutting woe, pins and elastics Tungsten
Carbide cutting edge.
Code: HCSLTC
Length: 13 cm
Capacity: 0.40mm Soft |
 |
|
|
MICRO MINIATURE LIGATURE CUTTER - T.C. |
Sharp pointed wing head for soft win and ligatures.
Tungsten Carbide blades ensures durability and sharp
cutting edge. Perfect for limited access cutting.
Code: HCMLTC120
Length: 12 cm
Capacity: 0.30mm Soft |
 |
|
|
HEAVY DUTY CUTTER - T.C. |
Compound action design for easy tatting up to
1.5mm hard wire, Tungsten Carbide cutting edges for
durability sharpness precision cutting and alignment.
Code: HCCATC170
Length: 17 cm
Capacity: 1.5 mm Hard |
 |
|
|
UNIVERSAL WIRE FORCEPS |
Tapered head with serrated law surface for super ior grip,
Integrated side cutter and recesses far shaping wire.
Code: HUWF16
Length: 16 cm
Capacity: 1.0mm Hard |
 |
|
|
LIGHT WIRE CONTOURING & CUTTING PLIERS |
Small tapered books with locating proove W bending
round wires to 0.20mm. Precision matching concave and
convex section for contouring loops mid arches to 0.55mm x 0 64mm. Integral cutter for wires up to 0.5mm.
Code: HCLW135
Length: 13. cm
|
 |
|
|
SMALL ADAMS - T.C. |
Triangular shaped jaws with 1mm flat tip. Tungsten Ccarbine jaw surface's with texturing for improved grip
and durability.
Code: HPSATC120
Length: 12.5 cm
Capacity: 0.76mm
|
 |
|
|
BIRD BEAK PLIERS |
The Classic round wire pliers. Precision matching on one side and pyramid on the other. Both terminate
with a 1. 25mm flat tip.
Code: HPBB125
Length: 12.5 cm
Capacity: 0.71 mm |
 |
|
|
BIRD BEAK PLIERS - T C |
Same us HPBB125 except with Tungsten Carbide tips to
ensure durability and precision.
Code: HPBBTC125
Length: 12.5 cm
Capacity: 0.71 mm |
 |
|
|
CRIMPABLE ARCHWIRE HOOK PLIERS |
For surgical hall hook and auxiliaries. Slotted tip holds auxiliaries secure to allow crimping.
Code: HPHCA130
Length: 13 cm
|
 |
|
|
DE LA ROSA |
Precision matched concave and convex jaws for smooth and accurate contouring of wire loops.
Code: HPDLR125
Length: 12.5 cm
Capacity: 0.55x0. 64mm |
 |
|
|
DE LA ROSA WITH GROOVES |
Same as HPDLRI25 except with 0.41, 0.46 & 0.56
grooves on the convex jaw.
Code: HPDLRWG125
Length: 12.5 cm
Capacity: 0.55x0. 64mm |
 |
|
|
NANCE PLIERS |
Stepped jaw with 3mm 4mm 5mm & 6mm sections for
square and round wires Rounded low edges to protect
the wire.
Code: HPN130
Length: 13 cm
Capacity: 0.56 mm |
 |
|
|
O'BRIEN LOOP FORMING PLIERS |
For making Bull, Omega and Closing loops. Triple
round jaw with 1.3, 1.8 & 2.2 and concave opposing jaw
with edged serrations. For shaping round and square
wires and staples.
Code: HPLFO140
Length: 12.5 cm
Capacity: 0.55x0. 64mm |
 |
|
|
TWEED LOOP FORM PLIERS WITH CUTTER |
Tripple round jaw with 1.3 2.0 & 2.4mm diameter
sections and flat opposing jaw. For shaping round and
square wires and staples up to 0.55 x 0.64 mm Integral
wire cutter up to 0.71 mm.
Code: HLPLFTWC130
Length: 13 cm
Capacity: 0.4 mm Hard |
 |
|
|
3 JAW PLIERS |
Precision jaws with rounded edges to prevent wire
damage. Sturdy one piece construction of the double lip
for extra strength.
Code: HP3J130
Length: 13 cm
Capacity: 0.76 mm |
 |
|
|
SMALL 3 JAW PLIERS |
Same as HP31130 except for smaller wires.
Code: HP3JS125
Length: 12.5 cm
Capacity: 0.71 mm |
 |
|
|
SMALL WEINGART UTILITY PLIERS |
Curved serrated laws for holding and shaping all types
of wires and staples. All outside edges are rounded for
comfort. Narrow curving jaws allow convenient and close access and manoeuvrability.
Code: HPSW40
Length: 14.5 cm
Capacity: 0.56 x 0.71mm |
 |
|
|
SMALL WEINGART UTILITY PLIERS - T C. |
Some as HPSW140 except with fine pitch. Tungsten
Carbide jaw surfaces for extra grip and durability.
Code: HPSWTC140
Length: 14.5 cm
Capacity: 0.56 x 0.71mm |
 |
|
|
LARGE WEINGART UTILITY PLIERS |
Popular Weingart pattern similar to HPSWI40 but more
robust for thicker wires.
Code: HPLW145
Length: 14.5 cm
Capacity: 0.76mm |
 |
|
|
LARGE WEINGART UTILITY PLIERS - T C |
Some, as HPLW145 except with fine pitch. Tungsten
Carbide jaw surfaces for extra grip and durability.
Code: HPLWTC145
Length: 14.5 cm
Capacity: 0.76mm |
 |
|
|
TWEED ARCH FORMING PLIERS - T.C. |
For forming square or rectangular wires. Tungsten
Carbide jaws for durability and precision.
Code: HPAT130
Length: 13 cm
Capacity: 0.55 x 0.64mm
|
 |
|
|
FORCE MODULE SEPARATOR |
Allows easy placement of separated elastics. Spring
loaded for a smooth return.
Code: HPFMS155
Length: 15.5 cm
|
 |
|
|
